Description

Complete Carnetic 316 Vertical Axle Wind Turbine 3 kW at 9 m/s 16 sqm. 6 meter Tower

What is included:
1) 6 meter long tower OD=244.5 mm ID=234.5 mm, hot dip galvanized.
Bottom flange: OD=500mm x 12mm. Ø22 mm x 8 hole @ 45 thru at bolt circle PCDØ400 mm. Top flange: OD=330 mm. Ø10.50 mm x 5 hole @ 72 thru bolt circle PCDØ300 mm.

2) Generator with 3D stator (pat. pending), 32 x wedge shaped neodymium permanent magnets, integrated bearing , 5x M10x30mm bolts.  Hot dip galvanized top cover hat.

4) 6 axis vibration sensor mounted under the generator base inside the tower.

5) Strut HUB for 3 or 4 wings. Hot dip galvanized

6) 3x Higher wing-struts (CWT-01-9.7) with Strut support tube (CWT-01-59) and higher (CWT-01- strut stiffeners (CWT-01 Hot dip galvanized

7) 3x Lower wing-struts (CWT-01-9.1) with lower strut stiffeners (CWT-01-58). Hot dip galvanized

8) 3x cedar unpainted straight wings. Modified NACA 0012H symmetric profile. With nuts and bolt and wing clamps and rubber wing protection.

9) Control box with rectifiers, and 3x IoT Rapsberry Pi Pico W

Power outputs are Isolated from Terra/Earth.
Two separate DC outputs with common 0V. Isolated Terra. 10 mm2 Connection block + 10 mm2 Ground (Green/Yellow).

Primary DC1 out: Buck-Boost converter up to 500 VDC (programmable) @ 18A
Secondary (dumpload) DC2 out: Buck converter max. 500 VDC @ 18A

Wifi 2.4 Mhz + Bouetooth BLE 5.3
50V nom. 3 Ah backup battery.